21 Mar, 2011
Acer Aspire 5515, 5532 , 5517, 5520 Loop Boot Motherboard Problem Fix
Posted by: admin
In this article we will show you fixing a boot loop Acer Aspire 5515, 5532 , 5517, 5520 using an oven! Yes, an oven! When departing from Acer Aspire 5515, 5532 , 5517, 5520, the device is turned on for a few second, flash-HDD, DVD / CD-ROM drive will start a few steps and then suddenly turned off. The process will start again automatically and repeatedly. In fact, this problem is caused by a dead motherboard. The dead motherboard is usually caused by a high number of solder joints. And now, use the oven, to solve the problem, here is the step:
Sponsored Links1. It is necessary to disassemble the Aspire 5515, 5532 , 5517, 5520 laptop to the motherboard, and remove
2. It is necessary to preheat the oven to 2000C, the following
3. You need to have 4 ball tin foil to prevent the motherboard from touching the metal in the furnace and put the motherboard in the 4 ball tin oil
4. Hold the motherboard in the oven for 7 minutes, no more, no less
5. If the time is up, open the hot oven and leave the board or the solder will spill, and will be completely dead.
6. When the 60 minutes is over, and the motherboard is cooled, reassemble.
7. And now, the motherboard will be fine, and you can start up the Acer Aspire 5520 properly.
